轻型切条切坯系统

Model:QTQD+QPA2-(height X thickness X pieces)-(power)
It consists of program control and air promotion slitter and light cutter
It's suitable for the product line of small scale,soft plasticity and semi hard plasticity.
To realize automatic and semi-automatic operation.

Structural characteristics:
1.) Automatic equipment of defending leaning:Never cut obliquely and no need to adjust.
2.) Stainless steel cylinder table-board:mud strips reaches the right place automatically; accurate positioning to avoid wasting the mud; saving oil 70%-100% than the normal table-board.
3.) Stainless steel push board: wear resistant, the working life is longer 3 times than the normal one.
4.) Oriented angle and Oriented arc: high accuracy to make the steel wires go into groove, reduce 70% broken steel wires averagely.
5.) High-abrasive material craft: Leader is hard chrome plate and the compound oriented bearing. Its resistance is small and its working life is long.
6.) Buffer power accumulator: absorb return impact, and translate it to push power.
7.) High strength, large thrust: mainly usages for the mud strip whose original material is coal gangue and shale.It’s suitable for different soft and hard plasticity mud strips: it’s saving oil When usages for high sand content mud or other inferior mud; if the mud strips is very soft, the expansion table-board should be intense in advance.
You can reffer the Parmeters for more details about Hammer Crusher.

Maximum incision rate: 20 ts/min  Maximum length of mud strips:1254mm

Maximum incision height: 250mm(specially appointed)

Maximum incision rate: 20 ts/min  Maximum length of mud strips:1254mm

Maximum incision height: 250mm(specially appointed)

Program control Auto brick cutting machine Video: